SCULPTURED JUMPERS
General Description
A general purpose interconnection system using established Sculptured circuit
technology which combines maximum flexibility with rugged termination features.
Benefits
- Space and mass savings
- Standard jumper lengths up to 101.6mm (4 inches)
- Custom jumpers on request
- Hand, wave or reflow solderable
- Differential conductor thicknesses combine flexibility with rugged terminations (see figure 2)
- Straight or formed fingers for surface mount or through hole soldering
- Elimination of connectors
- Plugs into standard sockets
- Superior current carrying capacity and heat dissipation
- Good flexibility
- No tooling charge for standard jumpers
Termination Fingers
Sculptured jumpers feature unique integral termination fingers for maximum
strength and reliability. (See Fig 2) These can be formed in various ways.
Connectors
Sculptured jumpers are suitable for use with many standard PCB-mounting
socket headers. (See Fig 3)
Design Tips
- When required, fingers should be formed prior to solder assembly and it is normal for this to be undertaken by Teknoflex on your behalf.
- For ease of assembly a maximum cable width of 75mm is recommended
- Include a 10% service loop in the cable length for strain relief
- Wherever possible it is cost effective to specify one of the standard insulation lengths. These sizes, which are available with a 2.54mm (0.1 inch) pitch and without artwork design and tooling charges, are detailed below.
- Consult our engineering team and/or refer to our Designers Guide during the design process.
|
Options
|
||||||||||||||||||||
Sculptured Circuits
If you need greater design flexibility, all of the features and advantages
of Sculptured circuits and flexible circuits can be combined in a custom interconnection
system. Please contact us for details.
